Do you know what’s special about Saltillo tiles?
Well, there are several specialties. The first lies in the clay which is used to make them. It’s found only in Saltillo, Mexico. Mexican Saltillo tiles are a handmade, unglazed extremely primitive variety. They’re too really special features found in Saltillo tiles. There are regional deposits of clay in Mexico and tiles are made using a very simple procedure even without using any machine.
The excavated clay is cleaned and mixed with water in order to prepare the mixture that’s needed to make Saltillo tiles. Then the wet clay is put into molds of various shapes and levelled well. Next, the prepared tiles are dried in the sun and fired at very high temperatures in cave-like special kilns. Inside the kilns, they’re burnt well until they get different reddish-brown colors. Then the final product comes out of the kiln and they’re distributed throughout the world to brighten your floors.
The quality of the tiles entirely depends on the cleanliness of the clay which is used to make them. Usually, clay is excavated from the banks of rivers and sifted well in order to get a fine ball of seasoned clay to mold tiles. If in any case, the manufacturers rushed through the process to supply for the growing demand in the tile market, they might tend to use unclean clay. What we call unclean clay is unsifted clay. They are considered as unclean or unpurified clay and tiles made of them exhibit rather a low quality. Tiles made of purified clay look great. But low-quality tiles create problems since they appear in the show rooms with other tiles. But a good dealer never accepts a low-quality tile to be sold in his shop. Therefore, always buy your tile needs from a reliable dealer such as Finecraftsimports. They never play any tricks with you.
Can Saltillo tiles be restored?
Yes. Most of the Saltillo tiles are worn out mainly due to the pressure exerted by heavy foot traffic. But they could be repaired and sealed to get the finish once lost. Saltillo tiles have a crust-like thing on the surface. It’s this part which is quickly damaged by foot traffic. After restoring process, it would look almost new. The sealing system too is highly developed now. So, the restoration process could be done giving a fine finish to the tile. Usually, Saltillo and many other Mexican varieties of tiles do not need tape applied to them. The polymer of the sealer has a close connection with the polymer of the tape which could sometimes result in damage to the tile. Usually, tape is used to protect the tile. But, in case of a Mexican paver no tape is needed.
Flooring in most Tuscan homes are finished by installing handmade clay floor tiles. Their yellow, red and dark orange hues are a charm to the eyes and they create a unique, attractive appearance cherished by every household. These colors stand straight to resist dust. If they used tiles of white or such light colors, the dust would tear off all the grace within a week or two. Dust, stains or other impurities will be clearly visible on a light surface more than they do on a darker one. Since Saltillo tiles always have a darker color the dust or any other blemishes won’t be visible so clearly.
Much care is needed for Saltillo tile floors True that you all love Saltillo tile floors. Yet, you need to pay more care and attention to keep them clean, neat and tidy forever. Saltillo tiles are highly porous and they soak in water easily. So, you must employ an experienced worker to install them. And from the installation until the end of the tile you must take care of it very well. And you may need a super quality sealant too. Oh, what a nuisance! You may pout. But remember. Precious things are hard to protect. So, never forget to take care of Saltillo.
Sweep well before vacuuming
You must sweep all the dust, dirt and pebble-like particles of sand completely off the Saltillo floor before vacuuming. It’s very essential since your vacuum will get damaged if any of these dirt particles sucked up into it. After that, mop the floor very well. This must be done once in three days. To allow the floor to get dry quickly, you must mop one room or one portion of an area at a time. Otherwise, if you walk on wet floors, the foot prints may stamped in. So, never walk on a wet floor.
How to know whether a Saltillo floor is sealed or not
It’s important to know this before cleaning and mopping a Saltillo floor. If the tiles and lines of grout are shiny or if the water drops sprinkled on the floor easily get beaded, the floor is sure to be a sealed one. However, it’s easier to preserve the cleanliness, shine and beauty of a sealed floor since dirt is hardly accumulated on it.
Or you can even remove the old sealer of your Saltillo floor, if it’s too dirty, outdated or discolored. For that you need to know whether your floor is either a water-based one or a polyurethane-based one. Sealants of polyurethane-based floors should be removed using a paint stripper whereas water-based ones could be easily removed. After the removal of the old sealant, you need to mop the floor to rinse off the remnants. Then let the floor to dry well before resealing it. Anyway, it’s most advisable for you to hire a professional for this course. Otherwise, the entire effort may go waste making the floor even worse than the former status.
However, the proper maintenance of the Saltillo tiled floors is essential to preserve its quality, durability and the elegance. So, never hesitate to spend a few hundreds of bucks to care for your precious floor. You’d be able to keep it fresh and shiny for a longer time.